Team Xtreem ARGB DDR4-3600 C14 RAM review

You can also be interested in these:

The ARGB 3600 MHz DDR4 ARB C14 Gaming RAM from Teamgroup Xtreem is a potentially excellent deal. The characteristics appear to check all the boxes, allowing for incredibly high speeds with very low latency thanks to Samsung’s B-die IC and an eye-catching yet understated appearance that blends well with any system.

The Team Xtreem ARGB RAM kit isn’t your typical DDR4 RAM, as it’s one of just a handful of 3,600MHz kits with a CAS latency of just 14. It is an elite gear with primary timings of 14-15-15-35. If you like to overclock your computer, the DDR4-3600 C14 kit might offer as much headroom as any memory modules now available. It does feature a default voltage of 1.45 volts, which is more than average for a DDR4 kit, however, keep in mind that this is a CAS 14 low latency kit. Furthermore, there is a lifetime warranty.

Design

The Xtreem ARGB memory modules are supported by a black PCB with a passive heat spreader made of aluminum alloy. The body is a translucent plastic with a dark blue and purple tint that lets the controllable RGB LED illumination shine through.

The lighting design is extremely unique. When the machine starts up, we discover that the memory has a pre-programmed, rainbow-like fade effect. As the color moves from the module’s center outward, each module cycles through all available color options. You can nicely synchronize the colors in your system in this way. Although RGB seems to be present in every new gaming system, this kit still looks great without it. The modules have a dark blue exterior that complements its RGB brilliance without detracting from it.

The rear side reveals the black heat spreader, therefore the design isn’t the same on both sides. On dual-channel motherboards, this isn’t a major concern, but on quad-channel platforms, it is apparent.

Team Group branded the memory modules with the T-Force emblem on the front and the Xtreem ARGB marking on a different silver strip. The top portion of the heat spreader has a T-Force text in the middle of it.

Features and specification

This outstanding memory kit was chosen by Team Group to be enclosed in their ARGB heatsink and to have 15 extremely bright LEDs installed within. They created and used innovative technologies for the heat spreader to give the Xtreem ARGB DDR4-3600 C14 its singularity. It has a full mirror surface on one side, the top, and a portion of the second side. Using the laws of optical reflection and penetrating light, they added life to the mirror surface by lighting it from behind with those controllable RGB LEDs.

Originally only offering five different units, the T-Force Xtreem ARGB has recently grown to include 13 SKUs. There are three different sizes of individual module density: 8 GB, 16 GB, and 32 GB. Since every SKU is made up of two modules, you would need to locate matching kits if you tried to fill more than two DIMMs.

There are three different frequency possibilities available: 3200 MHz, 3600 MHz, and 4000 MHz at the highest end. Hynix, Micron, or Samsung could be the IC you find inside, but with an XMP of 3600 CL14, you can be sure it’s Samsung.

There are three main layout designs for DDR4 PCBs. The maximum frequency that may be achieved is constrained by the older A0 architecture, which has the ICs distributed equally across the PCB. The ICs are positioned increasingly close to the edge of the PCB connector in the later A1 and A2 designs, which are essentially identical.

Because it enables higher frequencies and overall better compatibility, the A2-style PCB has replaced the previous official industry standard. As a result, motherboard producers are now routing memory traces on A2-style PCBs such that they line up with the location of the ICs.

Team Xtreem ARGB DDR- 3600 C14 software

Using ASRock Polychrome Sync, we evaluated the RGB functionality. The lighting management was readily handled by the motherboard software that came with it. It does the job and offers you complete access to each of the 15 LEDs. Team Group has formerly offered independent software for RGB control, however, it appears that they have discontinued it because it is no longer featured on their website.

Overclocking and latency tuning

One thing unites memory kits in the same DDR4-3600 C14 category: Samsung B-dies. As a result, each memory kit has the same amount of overclocking headroom. With the Xtreem ARGB kit, we were able to reach DDR4-4200 by lowering the timings to 19-19-19-39 and increasing the DRAM voltage to 1.45V.

Price and availability

Only a few DDR4-3600 C14 memory kits with a 16GB (2x8GB) capacity are available on the memory market. And the Xtreem ARGB is the least priced of them all, coming in at $159.99(opens in new tab). The availability of it is the only issue we have. The RAM kit is presently only available through Newegg, so finding it might be difficult.

Having high-performance RAM only makes sense when matched with a system that has comparable specs. That does not imply that purchasing a kit like ARGB DDR4-3600 C14 is a waste of money. Why not spend an extra $50 or so on some high-quality RAM if you’re going to spend $1000 or more on a graphics card to minimize any potential bottlenecks? Given that you’ll only pay $160 for this kit, we believe it to be a no-brainer.

Conclusion

A high-end item designed for serious PC enthusiasts is the Team Group T-Force XTREEM ARGB. We thought the RGB design and distinctive light diffuser system were simply fantastic; it’s a true one-of-a-kind innovation.

Although Team Group has always been at the forefront of innovation, their ARGB module surpasses even their high standards. The Xtreem ARGB DDR4-3600 C14 memory kit was expertly created by TeamGroup, and it surely checks all the tick buttons.

When switched up or off, the memory kit looks fantastic and functions just as well. The Xtreem ARGB is among the top five RAM benchmarks in our hierarchy and is the fastest DDR4-3600 C14 memory kit we’ve tested yet.